Controls
73
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
Settings and information
Operating principle
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 70
3 When the lights are switched on: instrument
lighting brightness 96
4 Calling up Check Control 79
5 Checking oil level 199
6 Setting the time 77
7 Setting the date 78
8 Viewing service requirement display 74
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure. The settings are
stored for the remote control currently in use,
refer also to Personal Profile on page 29.
iDrive concept, refer to page 16.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Display settings" and press the
controller.
Online Edition for Part-No. 01 41 0 012 355 - © 03/06 BMW AG
To Next Page
Loading...
Need help?
General
