Control Display screen contents
(vehicles with iDrive)
The current Status of Service items determined
by the CBS are shown in the Control Display.
You can also view additional information on the
service and maintenance requirements.
1. Open the start menu.
2. Press the controller to open the i-menu.
3. Select “Info sources” and press the
controller.
4. Select “Service” and press the controller.
5. If necessary, move the highlight marker to the
uppermost field. Turn the controller until
“Vehicle status” is selected and press the
controller.
6. If necessary, move the highlight marker to the
second field from the top. Turn the controller
until “Status” is selected and press the
controller.
A list of selected maintenance operations and, if
applicable, inspections required by law is
displayed.
You can request more detailed information on
every entry.
Select the entry and press the controller.
To exit from the menu:
Select the
arrow and press the controller.
Symbols
No service is currently required.
The deadline for service or a state
inspection is approaching. Please contact
your BMW center for an appointment.
The service deadline has already passed.
You can request more detailed information on
every entry.
Turn the controller to scroll through the list, then
confirm the selected entry.
Confirm to exit the list.
The current service status is automatically saved
in the vehicle’s ignition key. The Service Advisor
at your BMW center has a device called a key
reader. When your Service Advisor inserts your
key into the key reader, all pertinent vehicle and
servicing data will be available, and a customized
maintenance checklist is printed out based on
the specific operations called for by the
Condition Based Service.
7
To Next Page
Loading...
Need help?
General
