The Bluetooth name of the vehicle is dis‐
played.
5. Perform additional steps on the device, refer
to the device operating instructions: e.g.
search for or connect the Bluetooth device
or a new device.
The Bluetooth name of the vehicle appears
on the device display.
6. Select the Bluetooth name of the vehicle on
the device display.
Prompt via iDrive or the device to enter the
same Bluetooth passkey.
7. Enter the passkey and confirm.
8. Select the desired functions with which the
device is to be connected, e.g. "Audio".
9. "OK"
If pairing was successful, the device is displayed
as connected.
White symbol : the device is active as an audio
source.
If pairing was unsuccessful: What to do if..., refer
to page 215.
Connecting a specific device
A device that has already been paired can be
connected as an active audio source.
Connecting is not possible when data is ex‐
changed via a mobile phone connected via Blue‐
tooth.
Requirements
If necessary, activate the audio connection of
the desired device from the list of paired devi‐
ces.
1.
"CD/Multimedia"
2. "Bluetooth® (audio)"
3. If necessary, "Bluetooth® audio".
4. Select the desired device from the list of
paired devices.
5. "Options" Open.
6. "Configure phone"
7. "Audio"
8. "OK"
Connecting the device
1.
"CD/Multimedia"
2. "Bluetooth® (audio)"
Seite 213
CD/multimedia Entertainment
213
Online Edition for Part no. 01 40 2 900 579 - 03 12 490
To Next Page
Loading...
Need help?
General
