Telephone
Vehicle equipment
All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehicle,
e. g., because of the selected optional equipā
ment or country variant. This also applies for
safety-related functions and systems.
At a glance
The concept
Mobile phones or other external devices such as
audio players can be connected to the vehicle
via Bluetooth.
After these devices are paired once, they are
recognized automatically when the ignition is
switched on as soon as they are inside the veā
hicle and can be operated via iDrive, the buttons
on the steering wheel, and via voice activation.
Depending on their functionality, external deviā
ces can be used via the vehicle as a telephone
or as an audio source. The telephone functions
are described in the following.
Up to four external devices can be paired.
Certain functions may need to be enabled by the
mobile phone provider or service provider.
Using the mobile phone while driving
Make entries only when traffic and road
conditions allow. Do not hold the mobile phone
in your hand while you are driving; use the
hands-free system instead. If you do not obā
serve this precaution, you can endanger the veā
hicle occupants and other road users.ā
Snap-in adapter
The snap-in adapter is used to:
ā· Hold the mobile phone.
ā· Recharge the battery.
ā· Connect the mobile phone to an outside anā
tenna of the vehicle.
This provides for better network reception
and consistent sound quality.
Approved mobile phones
Details on which mobile phones and external
devices with a Bluetooth interface are supā
ported by the mobile phone preparation packā
age can be obtained at www.bmwusa.com/blueā
tooth.
Displaying the vehicle identification
number and software part number
The vehicle identification number and software
part number are needed to determine which moā
bile phones are supported by the mobile phone
preparation package. The software version of
the mobile phone may also be required.
1.
"Telephone"
2. Open "Options".
3. "BluetoothĀ® info"
4. "Display system information"
These approved mobile phones with a certain
software version, support the vehicle functions
described below.
Malfunctions may occur with other mobile
phones or software versions.
Do not operate a mobile phone that is connected
to the vehicle on the mobile phone keypad, as
this may lead to a malfunction.
A software update can be performed if necesā
sary.
Notes
At high temperatures, the charge function of the
mobile phone can be limited where appropriate
and the functions are no longer executed.
Seite 226
Communication Telephone
226
Online Edition for Part no. 01 40 2 900 579 - 03 12 490
To Next Page
Loading...
Need help?
General
