Picture 10 Picture 11
1. Enable the Bluetooth: Enter Bluetooth setup menu as Picture 15, set the Bluetooth to be “On”; then, the Bluetooth icon is flashing,
which indicates that the Bluetooth has not been matched. At the same time, enable the Bluetooth of your mobile phone.
2. Pairing: Click “Bluetooth” on the system main interface to enter the Bluetooth hands-free interface, click “PAIR” and enable the
searching function for new devices on your mobile phone. When the mobile phone has searched the signal of the system, the mobile
phone indicates “Connect with the device, Yes or NO”, choose “YES”and input the passward(1234)to confirm. The Bluetooth icon
on the screen does not flash when the system is connected to the mobile phone, otherwise, they should be paired again as above
instructions until they are connected successfully.
3. Making a call:
Input the phone number by the number keys on the screen and click the green answer key , then, the system will transfer the sound
of mobile to the car speaker. You can hear the dialing tone and the other’s voice from the car speakers. Click red ring-off key to
finish the call or ring off directly. When you are makig a call, you can click the switching key to switch the talk between car
speaker and the mobile phone to ensure your talk safety.
4. Answering a call:
The system is switched to Bluetooth hands-free interface automatically from any modes when there is an incoming call, the current play
To Next Page
Loading...
Need help?
General
