Oil Pan
The oil pan is made from an aluminum casting. The oil deflector and the intake pipe to
the oil pump are designed as one component. To facilitate attachment to the bedplate,
the oil return ducts are designed so that they extend over the oil deflector. Consequently,
the oil return ducts end in the oil sump.
Ducts are provided for the oil supply to the vacuum pump as it is now lubricated by
filtered oil and not by unfiltered oil as on the N54 engine.
N55, bedplate with oil pump and oil deflector
Index Explanation
1
Oil pump
2
Oil return ducts, intake side
3
Bedplate
4
Oil deflector
5
Intake manifold with oil screen filter
6
Oil return ducts, exhaust side
22
N55 Engine
To Next Page
Loading...
Need help?
General
