The adjusting screw can be
turned more easily if you
press the clutch lever forward
when doing so.
Adjustment options:
from Position 1: smallest dis-
tance between handlebar grip
and clutch lever
to Position 3: largest distance
between handlebar grip and
clutch lever
Brakes
Adjusting handbrake lever
Changing the position of
the brake-fluid reservoir can
allow air to penetrate the brake
system.
Do not reposition the handlebar
controls on the handlebars or the
handlebars in their mounts.
Adjusting the brake lever
while driving can lead to
accidents.
Only adjust the brake lever when
the motorcycle is stationary.
Turn adjusting screw 1 into
desired position.
The adjusting screw can
be turned more easily if
you press the handbrake lever
forward when doing so.
Adjustment options:
from Position 1: smallest dis-
tance between handlebar grip
and brake lever
to Position 4: largest distance
between handlebar grip and
brake lever
Mirrors
Adjusting mirrors
Move mirror into desired posi-
tion by applying light pressure
at edge.
Spring preload
Adjustment on rear wheel
It is essential to set spring
preload of the rear suspension
to suit the load carried by the
motorcycle. Increase spring
preload when the motorcycle is
heavily loaded and reduce spring
4
67
z
Operation
To Next Page
Loading...
Need help?
General
