On the road
Driving
Drive-ready state
Switching on drive-ready state
1. Depress the brake pedal.
2. Press the Start/Stop button.
Switching off drive-ready state
Steptronic transmission:
1.
Engage selector lever position P with the ve‐
hicle stopped.
2. Press the Start/Stop button.
The engine is switched off.
3. Set the parking brake.
Auto Start/Stop function
The Auto Start/Stop function switches the en‐
gine off automatically while stationary to save
fuel. The engine starts automatically under the
following preconditions:
Steptronic transmission:
▷ By releasing the brake pedal.
▷ When Automatic Hold is activated: step on
the accelerator pedal.
In vehicles with Mild-Hybrid technology, the en‐
gine will already switched off while coasting at
low speeds.
Parking brake
Setting
Pull the switch.
The LED on the switch and the indicator
light in the instrument cluster are illuminated.
Releasing
With drive-ready state switched on:
Steptronic transmission: press the switch
while the brake is pressed or selector lever posi‐
tion P is set.
The LED and indicator light go out.
The parking brake is released.
Steptronic transmission: parking
The parking brake is automatically set if the vehi‐
cle is being held by Automatic Hold and the
drive-ready state is switched off or the vehicle is
exited.
Steptronic transmission
Engaging selector lever position D,
N, R
▷ Drive mode D.
▷ Neutral N.
▷ R is reverse.
Seite 24
QUICK REFERENCE
On the road
24
Online Edition for Part no. 01405A11338 - VI/20
To Next Page
Loading...
Need help?
General
