3. Turn the bulb clockwise to remove it.
4. Insert the new bulb and attach the cover in
the reverse order.
Lateral turn signals
Follow the general instructions on Lamps and
bulbs, refer to page 223.
These lamps are made using LED technology.
Please contact your service center in the event
of a malfunction.
Tail lamps, bulb replacement
LED tail lamps
These tail lamps are made using LED technolā
ogy. Contact your service center in the event
of a malfunction.
Changing wheels
Hints
With three rows of seats, the vehicle equipā
ment does not include a spare tire.
When using run-flat tires or tire sealants, a tire
does not need to be changed immediately in
the event of pressure loss due to a flat tire.
The tools for changing wheels are available as
accessories from your service center.
Jacking points for the vehicle jack
The jacking points for the vehicle jack are loā
cated at the positions shown.
Compact wheel
Hints
Safety measures in case of a breakdown
or a wheel change
ā· Park the vehicle as far away as possible
from passing traffic and on solid ground.
Switch on the hazard warning system.
ā· Set the parking brake and engage transā
mission position P.
ā· Have all vehicle occupants get out of the
vehicle and ensure that they remain outā
side the immediate area in a safe place,
such as behind a guardrail.
ā· If necessary, set up a warning triangle or
portable hazard warning lamp at an approā
priate distance. Comply with all safety
guidelines and regulations.
ā· Perform wheel change only on a flat, solid
and slip-resistant surface. On soft or slipā
pery ground, e.g., snow, ice, tiles, etc., the
vehicle or vehicle jack can slip away to the
side.
ā· Do not place wood blocks or similar items
under the vehicle jack; otherwise, it cannot
reach its carrying capacity because of the
restricted height.
ā· If the vehicle is raised, do not lie under the
vehicle and do not start the engine; otherā
wise, a mortal hazard exists.ā
Use the vehicle jack only for changing
wheels
Use the vehicle jack only for changing wheels
Do not attempt to use it to jack up a different
type of vehicle or loads of any kind; otherwise,
this could cause material damage and personal
injury.ā
At a glance
The compact wheel and the tools are located
in the cargo area under the cargo floor cover.
Seite 226
Mobility Replacing components
226
Online Edition for Part no. 01 40 2 910 949 - VII/13