BMW X5 xDrive45e PLUG-IN HYBRID 2022 User Manual

Operating condition of the vehicle
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features and functions
that are not necessarily available in your vehi-
cle, e.g., due to the selected options or coun-
try versions. This also applies to safety-re-
lated functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
General information
Depending on the situation, the vehicle is in
one of the three states:
▷ Idle state.
▷ Standby state.
▷ Drive-ready state.
Idle state
Principle
When the vehicle is in idle state, it is switched
off.
General information
The vehicle is in idle state prior to opening
from the outside and after exiting and locking.
Safety information
Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before leaving the vehicle, secure the vehicle
against rolling away.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
▷ Set the parking brake.
▷ On uphill grades or on downhill slopes,
turn the front wheels in the direction of
the curb.
▷ On uphill grades or on downhill slopes,
also secure the vehicle, for instance with
a wheel chock.
Warning
Unattended children or animals in the vehicle
can cause the vehicle to move and endanger
themselves and traffic, for instance due to the
following actions:
▷ Pressing the Start/Stop button.
▷ Releasing the parking brake.
▷ Opening and closing the doors or win-
dows.
▷ Engaging selector lever position N.
▷ Using vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the
vehicle. Take the vehicle key with you when
exiting and lock the vehicle.
Automatic idle state
For instance, the idle state is automatically es-
tablished under the following conditions:
▷
After several minutes, if no operation takes
place on the vehicle.
▷ If the charge state of the vehicle battery is
low.
▷ Depending on the configuration via iDrive:
one or both front doors will be opened after
driving when exiting the vehicle.
Seite 43
Operating condition of the vehicle
CONTROLS
43
Online Edition for Part no. 01405A604A9 - VI/22

BMW X5 xDrive45e PLUG-IN HYBRID 2022 Specifications

General

Brand	BMW
Model	X5 xDrive45e PLUG-IN HYBRID 2022
Category	Automobile
Language	English

Summary

For Your Own Safety

Intended use

Heed guidelines for using the vehicle, including the owner's manual and traffic laws.

Maintenance and repairs

Requires suitable maintenance and repair work by authorized service centers or qualified shops.

California Proposition 65 Warning

Warning regarding chemicals known to cause cancer and reproductive harm in California.

CONTROLS - Getting in

Opening and closing

Explains how to open and close vehicle doors, tailgate, and use key functions.

Comfort Access

Describes accessing the vehicle without operating the vehicle key.

CONTROLS - On the road

Drive-ready state

Details how to turn the drive-ready state on and off.

Parking brake

Instructions on setting, releasing, and parking with the parking brake.

CONTROLS - Dashboard

In the vicinity of the steering wheel

Details controls located around the steering wheel, including switches and displays.

iDrive

Explains the operating concept of the infotainment system and its functions.

CONTROLS - iDrive

Operating concept

Explains the basic principles and operation of the iDrive system.

Safety information

Warns about potential distractions from operating the system while driving.

Programmable memory buttons

Describes how to store and recall frequently used functions.

CONTROLS - Driving

BMW eDRIVE

Explains the electric drive technology, high-voltage hybrid system, and charging.

Displays of the hybrid system

Provides information on the current state of hybrid operation and system activity.

Driving Dynamics Control

Explains how Driving Dynamics Control influences vehicle dynamics and hybrid system properties.

CONTROLS - Safety

Airbags

Details the different types of airbags and their protective functions.

Information on optimum protective effect of the airbags

Guides on proper seat position and safety for airbag effectiveness.

Automatic deactivation of the front passenger airbags

Explains how the system detects occupancy for airbag activation/deactivation.

CONTROLS - Driver assistance systems

Speed Limit Info

Shows current speed limits detected by cameras and navigation.

Manual Speed Limiter

Details how to set and use a speed limit to prevent exceeding it.

Cruise Control

Explains how to set and maintain a desired speed automatically.

MOBILITY - Charging the vehicle

General information

Explains charging methods via charging stations or domestic outlets.

Safety information

Covers critical safety precautions for working with electrical current and charging.

Charging from the power grid

Details charging options and recommendations for optimal energy use.

MOBILITY - Wheels and tires

Tire pressure

Explains the importance of tire condition and pressure for safety and comfort.

Checking the tire pressure

Provides instructions for regularly checking and correcting tire inflation pressure.

Tire pressure specifications

Lists tire inflation pressure specifications for various tire sizes and conditions.

MOBILITY - Maintenance

BMW maintenance system

Provides service notifications for maintaining road safety and operational reliability.

Condition Based Service

Determines maintenance needs based on sensors and operating conditions.

Service data in the vehicle key

Explains how service notifications are stored and read from the vehicle key.

MOBILITY - Breakdown Assistance

Hazard warning flashers

Describes the location and activation of hazard warning flashers.

Warning triangle

Details the location and retrieval of the warning triangle.

BMW Roadside Assistance

Information on contacting BMW Group Roadside Assistance for breakdowns.

Emergency Call

Explains how to trigger an emergency call automatically or manually via SOS button.

REFERENCE - Technical data

Dimensions

Lists key vehicle dimensions like width, height, length, and wheelbase.

Weights

Provides approved weight limits for the vehicle, payload, and trailer towing.

Filling capacities

Specifies the fuel tank capacity for the model.

REFERENCE - Everything from A to Z

Index

An alphabetical listing of topics and their corresponding page numbers for easy reference.