Bosch 3 603 C93 000 User Manual

English | 17
Bosch Power Tools 1 609 92A 04D | (19.12.12)
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 14.12.2012
Assembly
 Before any work on the machine itself, pull the mains
plug.
Auxiliary Handle
 Operate your machine only with the auxiliary handle
17.
Changing the position of the auxiliary handle
(see figure A)
The auxiliary handle 17 can be set to any position for a secure
and low-fatigue working posture.
– Turn the wing bolt for adjustment of the auxiliary handle 16
in anticlockwise direction and set the auxiliary handle 17
to the required position. Then tighten the wing bolt 16
again in clockwise direction.
Adjusting the Drilling Depth (see figure B)
The required drilling depth X can be set with the depth stop
18.
– Press the button for the depth stop adjustment 15 and in-
sert the depth stop into the auxiliary handle 17.
The knurled surface of the depth stop 18 must face down-
ward.
– Insert the SDS-plus drilling tool to the stop into the SDS-
plus tool holder 3. Otherwise, the movability of the SDS-
Rotary Hammer PBH ... 2800 RE 2900 RE 2900 FRE 3000 FRE Set 3000-2 FRE
Article number
3 603 C93 0.. 3 603 C93 1.. 3 603 C93 1.. 3 603 C93 2.. 3 603 C94 2..
Speed control
 
Stop rotation
 
Right/left rotation
 
Quick change chuck
– ––– 
Delivery Scope
– Keyless drill chuck
– –  
Rated power input
W720730 730 750 750
Impact frequency at rated speed
min
-1
4000 4000 4000 4000 4000
Impact energy per stroke accord-
ing to EPTA-Procedure 05/2009
J2.62.7 2.7 2.8 2.8
Rated speed
min
-1
1100 1100 1100 1100 1100
No-load speed
–1st gear
–2nd gear
min
-1
min
-1
0–1450
–
0 –1450
–
0–1450
–
0 –1450
–
0 –1450
0 –3000
Tool holder SDS-plus SDS-plus SDS-plus SDS-plus SDS-plus
Spindle collar diameter
mm 43 43 43 43 43
Drilling diameter, max.:
–Concrete
– Brickwork (with core bit)
– Steel
– Wood
mm
mm
mm
mm
26
68
13
30
26
68
13
30
26
68
13
30
26
68
13
30
26
68
13
30
Weight according to
EPTA-Procedure 01/2003
kg 3.0 3.0 3.0 3.0 3.3
Protection class
/ II / II / II / II / II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-318-005.book Page 17 Wednesday, December 19, 2012 1:09 PM

Bosch 3 603 C93 000 Specifications

General

Brand	Bosch
Model	3 603 C93 000
Category	Tools
Language	English