-9-
Technical Data
Model Number GLL100-40G
Article number 3 601 K63 W10
W
orking range
A)
100 ft (30 m)
Leveling accuracy
B)C)
±1/8 in. at 30 ft (±3 mm at 10 m)
Self-leveling range (typical) ±4°
Leveling duration (typical) <4s
Operating temperature 14˚F ~ 122 ˚F
(-10˚C ~ +50 ˚C)
Storage temperature -4˚F ~ 158 ˚F
(-20˚C ~ +70 ˚C)
Max. altitude 6560 ft (2000 m)
Relative air humidity, max. 90 %
Pollution degree according IEC 61010
D)
2
Laser class 2
Laser type 500–540 nm <10mW
C
6
10
Divergence 50 x 10 mrad (full angle)
Tripod mount 1/4”-20
Batt
eries 4 x 1.5V LR6 (AA)
Weight 1.26 lb (0.57 kg)
Dimensions
– Wit
hout LB 10
– With LB 10
5” x 2.5” x 4.5” (126 x 63 x 115 mm)
5.7” x 2.5” x 5.3” (145 x 63 x 134 mm)
Degree of protection
E)
IP 64 (dust tight and splash water
protected)
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).
B) At 20–25 °C
C) The values stated presuppose normal to favourable environmental conditions (e.g. no vibration, no fog, no
smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations in accuracy.
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is
expected.
E) Excludes battery compartment.
The serial number (9) on the type plate is used to clearly identify your measuring tool.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
