en
31
Setting
the temperature
Fig. "
Freezer
The temperature can be set
from -16 °C to -26 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Alarm functions
Fig. "
Door alarm
A warning signal is switched on if the
appliance door is left open for a while.
Close the door to switch off the warning
signal.
Thaw alarm
When the alarm button 5 is pressed,
the temperature display indicates for five
seconds the warmest temperature
reached in the freezer compartment.
Then this value is deleted.
The display 4 indicates the set freezer
compartment temperature without
flashing.
Henceforth the “warmest temperature”
will be redefined and saved.
Temperature alarm
The temperature alarm switches on
if the freezer compartment is too warm
and the frozen food is at risk of thawing.
The temperature display 4 flashes
and the alarm button 5 is lit.
The alarm may switch on without any risk
to the frozen food:
■ when the appliance is switched on,
■ when large quantities of fresh food are
placed in the appliance,
■ if the freezer compartment door is
open too long.
Power failure alarm
Fig. "
The power failure alarm switches on
if the freezer or refrigerator compartment
is too warm due to a power failure and
the food is at risk of thawing.
The alarm button 5 is lit and “PI” appears
on the temperature display 4.
Note
Do not refreeze thawing or thawed food.
Only ready meals (boiled or fried) may
be refrozen.
No longer store the frozen produce for
the max. storage period.
Switching off the alarm
Fig. "
Press the alarm button 5 to switch off
the warning signal.
To Next Page
Loading...
Need help?
General
