English - 1
1 Gear selector
2 Auxiliary handle
3 Torque setting ring
4 Keyless chuck
5 Screw
6 Battery
7 Battery unlocking button
8 Screwdriver bit
9 On/Off switch
10 Rotational direction switch
11 Soft grip
Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
GSR 18 VE-2/GSR 24 VE-2:
Typically the A-weighted sound pressure level of
the product is less than 70 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
2
.
GSB 18 VE-2/GSB 24 VE-2:
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 89 dB (A); sound
power level: 102 dB (A).
Wear hearing protection!
The typically weighted acceleration is 7.5 m/s
2
.
Tool Specifications
Cordless screwdriver GSR 18 VE-2 GSR 24 VE-2
Order number 0 601 951 3.. 0 601 951 2..
Cordless impact drill and
screwdriver
GSB 18 VE-2 GSB 24 VE-2
Order number 0 601 952 3.. 0 601 952 2..
No-load speed
1st gear [rpm] 0–400 0–510 0–520 0–450
2nd gear [rpm] 0–1 400 0–1 800 0–1 850 0–1 500
Torque adjustment range [Nm] 1–10 1–10 1–10 1–10
Torque, max. in
position “ ”:
Soft screwdriving case [Nm] 30 25 30 38
Hard screwdriving case [Nm] 55 50 55 65
Drilling dia., steel, max. [mm] 14 13 14 15
Drilling dia., wood, max. [mm] 36 35 36 38
Drilling dia., stone, max. [mm] – 16 17 –
Screw diameter, max. [mm] 10 10 12 14
Chuck clamping range [mm] 1.5–13 1.5–13 1.5–13 1.5–13
Auto-Lock ● ● ● ●
Drill spindle thread 1/2" 1/2" 1/2" 1/2"
Weight (without accessories),
approx.
[kg] 2.5 2.7 3.1 2.8
Battery NiCd NiCd NiCd NiCd
Temperature control NTC NTC NTC NTC
Rated voltage [V=] 18 18 24 24
Capacity [Ah] 2.0 2.0 2.0 2.0
Weight, approx. [kg] 0.95 0.95 1.3 1.3
Please observe the order number of your machine. The trade names of the individual machines may vary.
Machine Elements Noise/Vibration Information
9 • 2 609 932 048 • TMS • 16.01.03
To Next Page
Loading...
Need help?
General