-11-
Operating Instructions
Fig. 14
Check Fasteners
Periodically check that all fasteners are attached
and adjusted according to the assembly instruc-
tions included in this manual.
Service
NO USER SERVICE ABLE
PARTS. We recom mend that all
tool service be performed by a Bosch Factory Ser-
vice Center or Authorized Bosch Service Station.
Maintenance
Tool Lubrication
Your Bosch tool has been properly lubricated and
is ready for use.
Lowering Stand to its Lowest Position
(Fig. 14)
Begin with the stand in the locked upright position.
Firmly grip the Handle 4 with both hands and place
one foot against the Kick Bar 5. Pull back on the
Handle 4 and lower the stand to the ground.
1609B08221_GTA50W_Table_Saw_Stand_OSI_20230426.indd 111609B08221_GTA50W_Table_Saw_Stand_OSI_20230426.indd 11 4/26/2023 11:32:16 AM4/26/2023 11:32:16 AM
To Next Page
Loading...
Need help?
General
