Troubleshooting
TO AVOID RISK OF
ELECTRICAL SHOCK!
Repairs or replacement of parts
shall be carried out by qualified
technicians or licensed
electricians only_
Before calling the customer service,
check whether you can rectify the fault
yourself by means of the following
table.
If a fault cannot be rectified or a repair
is required:
1. Set program selector to "Off".
2. Turn off the circuit breaker.
3. Pull the main plug out of the
socket.
4. Call customer service
(see page 26).
Problem
Dryerdoesnotstart.
"Start!Stop"indicatorlight doesnot
illuminate.
Programhasbeeninterrupted.
A warningsignalisemittedandthe
displayshows"E:O!".
Degreeof dryinghasnotbeenreached
or the dryingtime istoolong.
Displaymayindicate"E:03".
Drumlightdoesnotfunction.
Possiblecause
Mainplugnotinsertedat allor notinsertedcorrectly.
A fuseof powersupplyhastripped.
"Start/Stop"buttonnot pressed.
Noprogramselected.
Doornotclosed.
Ambienttemperaturebelow41°F (5°C.)
Lintfilter dirty.
Exhaustairduct isblockedortoo long.
Faultin programsequenceor malfunction.
Theroom/cabinetisnot adequatelyventilated.
Moisturesensordirty.
Exhaustair ductis blockedortoo long.
Lintfilter dirty.
Laundrywastoo wet.
Unsuitableprogramselected.
Maximumdryingtime wasexceeded.
Motorlimittemperaturewasexceeded.
Degreeof drynessnotcorrectlyset
Noprogramselected.
Lightbulbdefective,light bulbburnedout.
Nopowersupply.
Lightbulbisloose.
Faultin programsequenceor malfunction."StaWStop"indicatorlightdoesnot
illuminate."Wrinkleblock" indicator
lights.
Thedisplayshows"000".
Lintfilter LEDis blinkingafterlint filter Blinkingof lint filter LEDis notanindicationof a Noactionrequired.Lightwill stopblinking.
hasbeencleaned problem.It is usedonlyas a reminder.
Remedialaction
Insertmainplugcorrectly.
Replace/switchon fuse.
Press"Start/Stop"button.
Selectprogram.
Closedoor.
Increaseroomtemperature.
Cleanfilter asdescribedonpage22.
Switchoff/switchonagain.
Cleanexhaustair duct.Reduceexhaustair ductto
maximumlengthasdescribedon page14.
Switchoff/switchonagain.
Switchoff dryer,leaveto cooldownfor30 min,
switchon again.
Restartprogram.
Provideanadequatesupplyof freshair.
Switchoff/switchonagain.
Cleanmoisturesensoras describedon page24.
Switchoff/switchonagain.
Cleanexhaustair extraction.Reduceexhaustair duct
to maximumlengthas describedon page14.
Switchoff/switchonagain.
Cleanfilter asdescribedonpage22.
Switchoff/switchonagain.
Spinlaundryat higherspeedinthe washing
machine.Switchoff/switchon again.
Selectprogramwithaid oftheprogramselection
table(seepage18).Switchoff/switchon again.
Cleanlintfilter (seepage22).
Checkexhaustair extraction.
Spinlaundryat a higherspeedin yourwasher.
Switchoff dryer,leaveto cooldownfor30 min.
Switchon again.Startprogram.
800 Series,Changesettingsfor degreeof dryness,
seepage20
Selectprogram.
Changelight bulb,seepage24.
Guaranteepowersupply.
Tightenlightbulb. Removeandreinstallthe coveras
directedon page24.
Switchoff dryer,leaveto cooldownfor30 min,
switchon again.
Restartprogram.
25