10
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Changing the basic settings
The hob must be switched off.
1. Switch on the hob.
2. Within the next 10 seconds, touch the 0 symbol for
4 seconds.
™ and ‚ flash alternately in the left-hand display and ‹ lights up
in the right-hand display.
3. Touch the 0 symbol repeatedly until the desired symbol
appears on the left-hand display.
4. Set the desired value on the settings range.
5. Touch the 0 symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
Display Function
™‚
Automatic childproof lock
‹ Switched off.*
‚ Switched on.
™ƒ
Audible signal
‹ Confirmation signal and operation error signal are switched off.
‚ Only the operation error signal is switched on.
ƒ Only the confirmation signal is switched on.
„ Confirmation signal and operation error signal switched on.*
™„
Energy consumption display(Ask your electricity supply company what the mains voltage is)
‹ Consumption display switched off.*
‚ Consumption display with mains voltage at 230 V.
ƒ Consumption display with mains voltage at 400 V.
„ Consumption display with mains voltage at 220 V.
… Consumption display with mains voltage at 240 V.
™†
Automatic timer
‹ Switched off.*
‚-ŠŠ Cooking time, after which the hotplates switch off
™‡
Duration of the timer end signal
‚ 10 seconds.*
ƒ n 30 seconds
„ 1 minute.
™Š
Time for selecting the hotplate
‹ Unlimited: The last selected hotplate can always be adjusted without having to select it again.*
‚ Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
™‹
Reset to basic setting
‹ Switched off.*
‚ Switched on.
* Basic setting
To Next Page
Loading...
Need help?
General
