Bosch PMD 7 User Manual

16 | English
2 609 140 996 | (23.9.13) Bosch Power Tools
Product Description and Specifications
Intended Use
The measuring tool is intended for the detection of ferrous metals (e.g.
reinforced steel), non-ferrous metals (e.g. copper pipes) as well as “live”
wires/conductors in walls, ceilings and floors.
Product Features
The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Marking aid
2 Signal LED
3 On/Off switch
4 Latch of battery lid
5 Battery lid
6 Sensor area
Technical Data
Digital Detector PMD 7
Article number
3 603 F81 100
Maximum scanning depth*:
– Ferrous metals
– Non-ferrous metals (copper pipe)
– Copper conductors (live)**
70 mm
60 mm
50 mm
Calibration automatic
Automatic switch-off after approx.
10 min
Operating temperature
0°C...+40°C
Storage temperature
–20 °C...+70 °C
Relative air humidity, max.
80 %
Batteries
3x1.5V AAA
Operating lifetime (alkali-manganese batteries) approx.
5h
Weight according to EPTA-Procedure 01/2003
0.1 kg
* depending on material and size of the objects as well as material and condition of the
base material (walls, ceilings, floors)
** less scanning depth for wires/conductors that are not “live”
 In terms of accuracy and scanning depth, the measurement result can be infe-
rior in case of unfavourable surface quality of the base material.
OBJ_BUCH-1913-002.book Page 16 Monday, September 23, 2013 12:33 PM

Bosch PMD 7 Specifications

General

Display type	-
Product color	Black, Green
Auto calibration	Yes
Built-in display	No
Detectable materials	Live cable, Non-ferrous metal
Maximum detection depth (steel)	70 mm
Maximum detection depth (copper)	60 mm
Maximum detection depth (live cable)	50 mm
Battery life	5 h
Battery type	AAA
Battery voltage	1.5 V
Battery technology	Alkaline
Auto power off after	10 min
Number of batteries supported	3
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	150 g