10
B O S C H
* Model dependent
6
Setting the
temperature
By default, the steam station
automatically chooses the “i-Temp”
temperature setting. If necessary, the
temperature setting may be modied
and adapted to your needs.
1. Check the ironing instruction label on
the garment to determine the correct
ironing temperature.
2. Select the required ironing
temperature setting:
Temperature
icon on
display
Suitable for
Any type of fabric which
can be ironed.
Temperature setting for
dark and delicate fabrics.
Reduces the risk of shiny
marks.
Synthetics
Silk – Wool
Cotton – Linen
3. The selected temperature icon
will ash while the soleplate (16) is
heating and will stop ashing as soon
as the soleplate has reached the
selected temperature.
Tips:
• Sort your garments out based on
their cleaning symbol labels, always
starting with clothes that have to be
ironed at the lowest temperatures.
• If you are not sure what the garment
is made of then begin ironing at a
low temperature and decide on the
correct temperature by ironing a
small section not usually seen when
worn.
7
Ironing with
steam
The steam control is used to adjust
the amount of steam produced when
ironing.
By default, the steam station automatically
chooses the “i-Temp” steam setting.
The steam setting can be changed by the
user by changing the temperature. The
steam station will propose the suitable
steam level automatically depending on
the temperature selection made.
Temperature icon
on display
Steam setting
If necessary, the steam level can be
adapted to your needs by touching the
icon on the display (8).
The selected icon ashes until the
pressure corresponding to each steam
level is reached. Steam is now ready
to be released by pressing the steam
release buttons (13 or 14*).
To Next Page
Need help?
General