4
For your own safety, never
connect plug to power source
outlet until all assembly steps are complete and until
you have read and understood the entire owner’s
manual.
Model T1B Miter Saw Stand is shipped complete in
one box.
Unpacking and Checking Contents
Separate all parts from packing materials and check
each one with the “Table of Loose Parts” to make
sure all items are accounted for before discarding any
packing material.
If any parts are missing, do not
at tempt to assemble the stand
until the missing parts are obtained and are installed
correctly.
Table of Loose Parts
ITEM DESCRIPTION QTY.
A Miter Saw Stand 1
B Saw Mounting Brackets 2
C WorkSupports 2
D Work Stops 2
STAND ASSEMBLY HARDWARE
(packaged in one bag)
E Carriage Bolts (M8 x 26 mm) 4
F Carriage Bolts (M6 x 46 mm) 2
G Carriage Bolts (M8 x 44 mm) 4
H Flat Washers 4
I Lock Washers 4
J Bolt Retainer 2
K Nuts 4
L Short-Slot Sliding Mounting Plates 2
M Long-Slot Sliding Mounting Plates 2
N Work Stop Adjustment Knobs 2
O Operating Guide 1
Unpacking and Checking Contents
A
B
C
D
F
E
G
I
J
K
LM
N
O
H
To Next Page
Loading...
Need help?
General
