16 - ENGLISH
BATTERY CHARGING
Connect the USB cable
1. Plug the small end of the USB cable into the USB connector.
2. Plug the other end of the USB cable into a wall charger or computer that is
powered on.
While charging, the last lit battery indicator blinks white. Allow up to three hours to
fully charge the battery. When the battery is fully charged, all five battery indicators
glow solid white. A full charge powers the speaker for up to six hours.
Battery indicators
Hear the battery level
Each time you power on the speaker, a voice prompt announces the battery level. When
the speaker is in use, a voice prompt announces if the battery needs to be charged.
To hear the battery charge level while using your speaker, press and hold the Power
button
until you hear a voice prompt.
Note: To visually check the battery, press and hold
while viewing the battery
indicators (see page 19).
To Next Page
Loading...
Need help?
General