Bose ControlSpace CC-16 User Manual

13
Mounting the CC-16 zone controller
Warning: The CC-16 must be installed in a National Electric Code (NEC) approved,
enclosed electrical wall box.
After setting the DIP switches and connecting the wires, mount the CC-16 zone controller in the
electrical box. Two sets of screws are provided. Use the screws that are appropriate for your
wall-box – the #6 for North American boxes, and the M4 for Japanese, European and Australian
boxes.
CAUTION: Do not overtighten the screws. Overtightening may cause the frame to break.
Mounting
After screwing the frame into the wall box, remove the protective clear film and snap on the
cover. The cover can be removed later using a small flathead screwdriver in the slots on the
sides.
Mounting the CC-16 Zone Controller in a North American 2-gang wall box

Bose ControlSpace CC-16 Specifications

General

Brand	Bose
Model	ControlSpace CC-16
Category	Controller
Language	English