Bose FreeSpace DS 100SE Technical Data Sheet

22
pro.Bose.com
OOFF
88
FreeSpace
®
DS 100SE
Loudspeakers
Recommended Loudspeaker Equalization Curve
Detailed Product Specifications
Additional Product Information
This product is equipped with a protection
circuit that will reduce the high frequencies
to an audibly lower level when the loudspeaker
is overdriven. In the event the protection circuit
is activated, reduce the input level.
Performance of the FreeSpace
®
DS 100SE loud-
speakers can be maximized through the use of the
recommended Bose
®
loudspeaker equalization
resident in select Bose electronics or by using other
equipment with parametric equalization. The
loudspeakers can be used out of the box with a
55-Hz high-pass filter when the recommended
loudspeaker equalization is not used.
1–4
See “How our Loudspeakers are Measured” on page 7.
Power handling
1
100W
Nominal Impedance (transformer bypass) 8Ω
Sensitivity
2
(at 1W @ 1m) 85 dB-SPL
Maximum SPL
3
105 dB-SPL
(pink noise @ 1m @ rated power) 111 dB-SPL (Peak)
Frequency range
4
(-3 dB) 65 Hz – 16 kHz
Beamwidth (-6 dB point, average 1– 4 kHz) 180° H x 75° V
TECHNICAL DATA SHEET
4099_FreeSpace_DS_100SE_TDS 2/26/07 11:00 AM Page 2

Bose FreeSpace DS 100SE Specifications

General

Certification	CE, IEC 529
Product color	White
Housing material	Acrylonitrile butadiene styrene (ABS)
Recommended usage	-
Suitable for outdoor use	Yes
Driver diameter	57 mm
Woofer diameter	133 mm
Number of drivers	2
Speaker enclosure	Ported
Speaker placement	Ceiling-mountable, Wall-mountable
Audio output channels	1.0 channels
Woofer diameter (imperial)	5.25 \
Impedance	8 Ω
Sensitivity	85 dB
Frequency range	75 - 18000 Hz
RMS rated power	- W
Package weight	7700 g
Transformer taps	12.5, 25, 50, 100 W

Weight and Dimensions

Depth	216 mm
Width	381 mm
Height	178 mm
Weight	6400 g
Depth (with stand)	280 mm