English • 11Owner's Guide • L1 Pro32 Portable Line Array
PRO.BOSE.COM
Setup
Additional Adjustments
Channel Mute
Press the Channel Mute to mute the audio for an individual channel. While a channel is
muted, the button will illuminate white. Press the button again to unmute the channel.
Phantom Power
Press the Phantom Power button to apply 48-volt power to channels 1 and 2. The
LED will illuminate white while phantom power is applied. Apply phantom power
when using a condenser microphone. Press the button again to turn o phantom
power.
Note: Phantom power will only aect sources connected to a Channel Input using an
XLR cable.
System EQ
Select your system EQ by pressing the System EQ button until the
corresponding LED for your desired EQ illuminates white. Choose
between OFF, LIVE, MUSIC, and SPEECH. Your chosen EQ will stay
selected when you power o and power on your L1 Pro.
Note: The system EQ aects power stand/array audio only. System EQ
does not aect XLR Line Output audio.
OFF
OFF
To Next Page
Need help?
General
