Listening to the radio
Turning the system on and choosing the radio
Press the AM/FM key on the remote or the console to turn your music system on to the most
recently heard AM or FM station.
Note: If the system is on and the radio is already selected, this key switches between the
AM and FM bands.
Tuning
Seeking the strongest stations
• Press and release the SEEK _ (forward)or _ (reverse) key on the remote to seek and
stop at the next strong signal. Ifyou hold these keys down, the radio continues to seek
without stopping at any station.
• Or, press SEEK/TUNE > or < (under the CD cover) on the music center.
• To stop seeking in one direction, briefly press the opposite direction key.
Switching between AM and FM
Press the AM/FM key to switch to the other band.
Manual tuning
If you want to tune the radio to a distant or weak station that the radio cannot seek, use the
SEEK/TUNE keys, located under the CD cover.
1. Hold down the > or < key to scan through the stations.
2. Release the > or < key to stop at a selected station.
3. As soon as the scan stops, tap the > or < key to tune one channel at a time.
Setting a station preset
Your Lifestyle ®music center can store up to 20 AM and FM stations in any combination.
1. Select a radio station you wish to store as a preset.
2. Press the STORE key (located under the CD cover). The station is stored in the lowest
available preset location.
3. If you decide not to store the displayed station in the displayed preset location:
a. Press and hold the STORE key.
b. Press the SKIP _ (forward) or I_ (reverse) key to select a different preset number for
this station.
c. Release the STORE key. The frequency of the preset station flashes.
Note: You cannot store a station in an already-occupied preset location without erasing that
preset station first (see "Erasing a preset station" below). If you attempt to store more than 20
stations, the preset display will flash ' '
Selecting a preset station
Once you set one or more station presets, press the SKIP I_1 (forward) or I_ (reverse) key to
select the next or the previous preset station.
Erasing a preset station
1. Use the SKIP I_ (forward) or I_ (reverse) keys to select the preset station you wish to
erase.
2. Press the ERASE key (located under the CD cover). The preset number is no longer lit.
16 October 22, 2001 AM251174_03_V.pdf
To Next Page
Loading...
Need help?
General
