CONFIRMING OPERATION
Your
Bose®
link
expansion room
product
• Room code
Make sure the system, amplifier, or powered speaker room
code setting matches that
of
the remote you are using
in
the
expansion room.
For information on room code settings and how to change
them, refer
to
the owner's guide that came with your
Bose®
link
product.
Troubleshooting
Problem
What
to
do
No sound
•
For both the
ALB
transmitter and
AR1
receiver, make sure:
- the audio source is plugged in, turned on, and working.
- the
Bose®
link A cable
is
securely connected at both ends.
Refer to 'IConnecting
to
a
Bose®
link compatible product" on
page
5.
- the small connector end of the power cord is inserted firmly
Into the AC Power jack on the connection panel and the
power pack is plugged securely into a working AC outlet.
- the Setup code switches on the connection panel
of
the
transmitter and the receiver are set identically. There are four
options: 1 & 2 up; 1
&2 down; 1
up
& 2 down; 1 down &2 up.
- the Status LEOs are lit a solid green to indicate solid
communication between the
two
parts. If not, refer
to
the
next problem
in
this table.
•
For the expansion room products, make sure:
- the system, amplifier, or powered speaker
is
plugged
in
and
turned on. On
an
SA-2
or
SA-3 amplifier
in
that room, make
sure the status LED
is
lit to indicate the amplifier
is
working.
- the room code
is
set on the Bose link remote control
or
PERSONAL® music center
II
to
match the room codes on
the amplifier
or
powered speaker and are unique to this
expansion room.
- the house
code
is set on the Bose link remote control or
PERSONAL music center
II
to
match the house code of the
L1FESTYLE®
system
in
the main room.
Above
·
Move the receiver and transmitter closer together.
problem
·
Move the receiver, the transmitter,
or
both so the transmission
persists
path between them does not intersect with large metal objects
and the
Status LED
(like a refrigerator), impervious construction materials (like thick
lights are not
masonry) or other obstructions (like a pool of water).
solid green
·
Check
to
see if the Status LEOs turn green as a result of the
above efforts. For details, refer
to
"Check the indicators and
settings
ll
on page
8.
9
To Next Page
Loading...
Need help?
General
