Adjusting
for
comfort and stability
There are several
ways
you
can adjust
your
headset
to
provide
additional
comfort
and stability. Using
the
adjustment
slider
and
clothing
clip
you
can
customize
how
you
wear
your
headset.
No
audio/Intermittent
•
Make
sure
that the headset plug
is
securely
connected to the headphone jack.
•
Try
another audio device.
Excessive bass
•
Turn
off
any
audio enhancement features
on
the audio source.
Microphone
is
not
•
Make
sure
that the headset plug is securely
picking-up sound connected to the headphone jack.
•
Make
sure
the microphone
is
not being
blocked or covered
The
microphone
is
located
on
the
back
of
the
Answer/End
button
(you
may
notice
the
small
opening
for
the
microphone).
Phone not
•
Make
sure
that the headset plug is securely
responding to button
connected to the headphone jack.
presses
•
For
multi-press functions:
Vary
speed of
presses.
Apple product not
•
Full
controls
may
not
be
available for some
responding to remote
Apple products.
Ear
tips falling off
•
Make
sure
the
ear
tips
are
securely attached
to the earpiece and nozzle hook.
Lost ear tip
•
Visit owners.Bose.com for replacement tips.
Sound
is
muffled
•
Make
sure
ear
tips and headset nozzles
are
from earpiece
clear
of
any
debris or wax build-up.
•
Unplug the headset from the audio source,
then plug back
in
making sure they
are
securely connected.
•
Try
another audio device.
Troubleshooting
If you experience any trouble using your headset, try the following
troubleshooting instructions. If you still need help, see
the
contact
information on the inside
back
cover for assistance in your area.
Problem
What
to
do
~~L
I
I
Using a single
earpiece
The Bose® MIE2i
mobile
headset can
be
used with only
the
right
(R)
earpiece in
your
ear. This
allows
you
to
take
calls
and
still hear surrounding sounds.
Using the clothing clip
Use
the
clothing
clip
to
fasten
the
cable
to
your
clothing,
for
convenience, stability, and
to
help
manage
the
cable. This can
be
helpful
during
high-movement
activities
or
when
using
the
headset in a single earpiece
configuration.
Using the adjustment slider
Move
the
adjustment
slider
up
or
down
to
reduce t
or
increase
the
amount
of
loose
cord
between
the
left
and
right earpiece. Finding
the
right position
for
the
slider can
help
optimize
the
placement
of
the
Answer/End
button
and integrated
microphone.
4
To Next Page
Need help?
General
Weight and Dimensions
