Bose PowerShare PS604D User Manual

English • 21Installation Guide • PowerShare PS604D/PS404D
pro.Bose.com
Technical Information
Technical Specifications
PS604D
Power Rating
Amplifier Power 4 × 150 W (THD+N < 0.04% 1 kHz, 4–8 Ω, 70/100 V)
Maximum Power per Channel 600 W @ 4–8 Ω, 70/100 V
Gain (Low-Z mode) 32.0 dB
Gain (70 V mode) 35.0 dB
Gain (100 V mode) 38.0 dB
Audio Performance
Frequency Response 4–8 Ω: 20 Hz to 20 kHz (± 0.5 dB @ 1 W); 70/100 V: Same as 4–8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk) > 85 dB @ 1 kHz, > 65 dB @ 20 kHz
Signal to Noise Ratio 100 dB (at rated power, A-weighted)
Audio Inputs Analog
Dante®
Input Channels 4 balanced 4 digital
Connectors 12-pin Euroblock RJ-45 (primary)
Input Impedance 20 kΩ —
Maximum Input Level 20 dBu (at 12 dBu sensitivity setting) —
Sensitivity 4 / 12 dBu (low/high sensitivity) —
Audio Outputs Analog Dante
Outputs 4 4 digital
Connectors 8-pin inverted Euroblock RJ-45 (secondary)
Integrated DSP
A/D and D/A Converters 24-bit / 48 kHz
Processing Functions Matrix mixer, loudspeaker EQ, real-time 9-band PEQ, V
Pk
/V
RMS
limiters, delay, band pass, mute/
output polarity inversion
Audio Latency < 1 ms (Analog input to analog loudspeaker output)
Indicators and Controls
Power LED Solid green: Power is on. Blinking green: Unit is in standby mode. Solid amber: Thermal fault.
Solid red: Supply fault.
Input Signal LED Green: Signal present. Amber: Input is near clipping. Red: Input is clipping.
Solid red: Indicates a fault.
Output Limit LED Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault.
Controls, Front Panel Power On/O
Controls, Rear Panel Output attenuators
Electrical
Mains Voltage 100 VAC to 240 VAC (±10%, 50/60 Hz)
AC Power Consumption 120 VAC: 14 W (Standby), 700 W (Max) 230 VAC: 14 W (Standby), 700 W (Max)
Mains Connector Standard IEC (C14)
Maximum Inrush Current 14.14 A (230 VAC / 50 Hz), 8.04 A (120 VAC / 60 Hz)
Protections High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage
Physical
Dimensions (H × W × D) 44 mm × 483 mm × 414 mm (1.7 in × 19.0 in × 16.3 in)
Shipping Weight 7.8 kg (17.2 lbs)
Net Weight 6.4 kg (14.1 lbs)
Cooling System Microprocessor controlled, variable speed fans, left to right air flow
General
Inputs (Control) Mute input control

Bose PowerShare PS604D Specifications

General

Purpose	Performance/stage
On/off switch	Yes
Product color	Black
Connectivity technology	Wired
Amplifier class	A
Output impedance	4 - 8 Ω
Input sensitivity	4 mV
Audio input channels	4.0 channels
Peak power per channel	150 W
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.04 %
Ethernet LAN (RJ-45) ports	1
Speakers connectivity type	-
LED indicators	Link, Network, Power
Maximum current	14.14 A
AC input voltage	100 - 240 V
Power consumption (standby)	14 W
Harmonized System (HS) code	85184000

Weight and Dimensions

Depth	414 mm
Width	483 mm
Height	44 mm
Weight	6400 g