28 - ENGLISH
ALTERNATE SETUP
Connecting a source to the soundbar
If you do not get sound from a source, such as a DVD/Blu-ray Disc™ player, cable/
satellite box, game system or DVR, connected to your TV, connect it to the soundbar.
Use only one audio cable.
CAUTION: If using an optical cable, remove the protective caps from both ends.
Inserting the plug in the wrong orientation can damage the plug and/or the
connector.
1. On the back of your source, locate the Audio OUT (digital) connector panel.
Soundbar connector panel
Audio OUT
Source connector panel
2. Choose an audio cable.
3. If you have not already, disconnect your TV from the soundbar.
4. Connect the audio cable from your cable/satellite box’s Audio OUT (digital)
connector panel to the soundbar.
Note: Do not disconnect your source’s video cable, such as an HDMI™ cable, from
your TV.
To Next Page
Loading...
Need help?
General
