Bose SoundTouch 20 User Manual

ENGLISH - 19
BLUETOOTH® TECHNOLOGY
Reconnect a mobile device
On the speaker’s button pad or remote control, press and release until a
Bluetooth pairing message appears on the display.
Your speaker tries to reconnect with the most recently connected mobile device.
Note: The mobile device must be within 30 ft. (9 m) of the speaker and powered on.
Connect using the Bluetooth feature on your mobile
device
1. On your mobile device, turn on the Bluetooth feature.
Tip: The Bluetooth menu is usually found in the Settings menu.
2. Select your speaker from the mobile device list.
Your speaker powers on and emits a tone.
Clear the speaker’s Bluetooth
pairing list
On the button pad or remote control, press and hold (10 seconds) until a pairing
list cleared message appears on the display.
The speaker is ready to connect to a device (see page 17).
Use the SoundTouch® app
You can also clear the pairing list using the app.
1. From within the app, select > Settings > Speaker Settings and select
your speaker.
2. Open the Bluetooth menu item and clear the pairing list.

Bose SoundTouch 20 Specifications

General

RMS rated power	- W
Number of drivers	-
Audio output channels	2.0 channels
Display type	OLED
Product color	Black, Grey
Control type	Buttons
Volume control	Digital
Supported radio bands	Not supported
Built-in storage media	No
Audio formats supported	AAC, MP3, WMA
Internet radio services supported	iHeartRadio, Pandora
Mobile operating systems supported	Android, iOS
Network streaming services supported	Pandora
Wi-Fi standards	802.11b, 802.11g
Cables included	AC

Weight and Dimensions

Depth	104 mm
Width	314 mm
Height	188 mm
Weight	3180 g