EasyManuals Logo
Home>Bose>Speakers>Virtually Invisible 791 series II

Bose Virtually Invisible 791 series II User Manual

Bose Virtually Invisible 791 series II
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4 - English
About your Virtually Invisible
®
791
series II or 591 in-ceiling speakers
The Bose
®
Virtually Invisible
®
791 series II or 591 in-ceiling
speakers provide s uperior performance for built-in stereo
music listening and home theater enjoyment.
Unpacking
Carefully unpack the carton and confirm that the following
parts are included:
Virtually Invisible
®
791
series II speakers
Virtually Invisible
®
591
speakers
Two speakers Two speakers
Two speaker grilles Two speaker grilles
Template Template
Note: If part of the system is damaged, do not use it. Contact
your authorized Bose
®
dealer or Bose customer service.
Refer to the contact sheet in the carton.
Recommended tools
You may need the following tools to complete installation:
Phillips-head screwdriver Cutting tool
Power drill Safety goggles
Speaker wire requirements
Gauge Maximum Length
18 AWG (0.82 mm
2
) 20 ft. (6 m)
16 AWG (1.3 mm
2
) 30 ft. (9 m)
14 AWG (2.1 mm
2
) 50 ft. (15 m)
12 AWG (3.3 mm
2
) 90 ft. (27 m)
Allow enough wire from the ceiling to wire the speakers
before installing.
Strip ½ in. (13 mm) of insulation at each end of both wires.
Please check your local building codes and use only the
correct type of wire required for in-ceiling installation.
For information on installing speaker wire, consult a
professional electrician or audio/video installer.
Placement guidelines
For optimal stereo performance, install the speakers in
positions similar to the diagram below at a minimum of the
suggested distances:
Notes:
Use a stud finder to ensure the speaker hole is at least 4¾
in. (12 cm) away from a joist.
Mount these speakers in wood frame or similar construction
only. Bose recommends installing these speakers only in
wood frame or similar construction with adequately spaced
studs, as found in 2 x 6 construction.
Placement in unfinished construction
If you are planning installation in unfinished construction,
purchase the Bose rough in kit. See “Accessories” on page
7.
Introduction
> 6 ft. (2 m)
> 2 ft.
(.6 m)
> 3 ft.
(1 m)
> 3 ft.
(1 m)
> 2 ft.
(.6 m)
> 2 ft.
(.6 m)
> 2 ft.
(.6 m)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bose Virtually Invisible 791 series II and is the answer not in the manual?

Bose Virtually Invisible 791 series II Specifications

General IconGeneral
BrandBose
ModelVirtually Invisible 791 series II
CategorySpeakers
LanguageEnglish

Related product manuals