Name: Bose Virtually Invisible 891
Brand: Bose
Rating: 4 (1 reviews)

To Next Page

To Previous Page

English - 5

Installing the Speakers

Cutting the speaker hole

1. Trace the template in the speaker location.

WARNING: Do not cut into surfaces that have hazards

concealed behind them such as electrical

wiring or plumbing. If you are unsure of your

ability to mount this speaker, contact a

professional installer.

2. Drill a hole inside the template area large enough for your

cutting tool.

3. Cut along the line you traced.

4. Remove the cutout section.

5. Clear away any torn or rough material from around

the hole.

Connecting the speaker wire

1. Pull out at least 14 in. (36 cm) of the speaker wire.

Allow enough wire to connect the speaker from where you

are standing.

2. Connect the positive wire to the red marked terminal on

the speaker.

Note: The terminal marking is located on the top of

the terminal.

Virtually Invisible® 691 speaker

3. Connect the negative wire to the black marked terminal on

the speaker.

Red (positive)

marking

Questions and Answers:

Need help?

Do you have a question about the Bose Virtually Invisible 891 and is the answer not in the manual?

Bose Virtually Invisible 891 Specifications

General