8
Calibration
The thermometer is initially calibrated at the time of manufacture. If this
thermometer is used according to the use instructions, periodic re-adjustment
is not required. If at any time you question the accuracy of temperature
measurements, please contact Consumer Relations.
Replacing the batteries
The Forehead thermometer comes with 2 AAA batteries.
To install the batteries, slide open the battery door as shown.
Insert 2 AAA batteries, correctly positioning with positive “+” and
negative “-” as shown. Replace the battery door and close
securely.
Replace the batteries when the flashing battery symbol appears
on the LCD screen. Dispose of batteries according to local waste
management directions.
Care and cleaning
Use an alcohol swab or cotton swab moistened with alcohol
(70% Isopropyl) to clean the thermometer casing and the
measuring probe. Ensure that no liquid enters the interior of the
thermometer. Never use abrasive cleaning agents, thinners or
benzene for cleaning and never immerse the instrument in water
or other cleaning liquids. Take care not to scratch the surface of
the LCD by replacing the protective cap after use.
To Next Page
Need help?
General
