My Friends
This list contains all the connected friends that are allowed to send photos to your frame.
Change options for a friend
Click the options icon to open the friend options menu. From here you can allow /
disallow if a friend may share the code to the frame. If this is enabled the friend can retrieve
and share the code to the frame from his/her app.
From the options menu you can also delete a friend, by pressing the DELETE FRIEND
button. This will remove the friend from the list and thereby remove their permission to
send photos to the frame. You will then be asked to confirm the removal and if you would
like to remove all photos previously received from this friend.
Add person
To allow a new person to send you photos, simply tap the add friend button
and share the
presented code in whatever way you prefer.
Display
Brightness level
Adjust the brightness level of the
screen.
Sleep mode
Frameo offers a sleep mode which turns off the screen to reduce power consumption. The
default setting is to turn off the screen at 23:00 and turn on the screen again at 07:00. To
change this just set the sleep mode start/end time.
Your frame is not powered down or in standby, so you will still be able to receive
photos during sleep mode.
Slideshow
Timer
Set the duration that a photo should be displayed before showing the next
photo.
11
To Next Page
Loading...
Need help?
General
