Page 14
2
Lift Securement (continued)
Underfloor Reinforcement Brackets (continued)
Two base plate mounting bolts must secure
each bracket.
Underfloor reinforcement brackets must reach
and overlap the nearest subframe member
flange (see Figures J and K). Cut the “L” bars to
length.
Technical Assistance: If the reinforcement brack-
ets will not work as detailed for your particular
installation, call 1-800-THE LIFT for technical
assistance. If the base plate mounting holes cannot
be used in your application, call for technical assis-
tance. Underfloor vehicle configuration data is
available for Ford, Chevy/GMC and Dodge vans
(not available for all applications).
Vehicle
Subframe
Vehicle
Subframe
Underfloor
Reinforcement
Bracket
Underfloor
Reinforcement
Bracket
Floor
Underfloor reinforcement brackets
must reach and overlap nearest
subframe member flange.
Figure K
Check for obstruc-
tions such as gas
lines, wires, exhaust,
etc. before drilling or
cutting. Failure to do
so may result in
serious bodily injury
and/or property
damage.
W
A
RNING
Lift Installation Instructions
To Next Page
Loading...
Need help?
General
