Page 78
Model No. Cylinder Code
Series No.
Date of Manufacture
Serial No. Pump Code
THE BRAUN CORPORATION
P.O. BOX 310
MODEL
SERIAL NUMBER
L917IB
219-946-6153
WINAMAC IN 46996
PATENT 5 , 261,779 5,806,632
MFG DATE
06-01003 30 14CG
01/2002
OWNER'S WARRANTY REGISTRATION
PURCHASED FROM
DATE INSTALLED
NAME
ADDRESS
CITY
TELEPHONE
TO VALIDATE WARRANTY
REGISTRATION CARDS MUST BE RETURNED TO THE BRAUN CORPORATION.
OWNER
STATE ZIP
L917IB-06-01003-30-14CG
Warranty and Registration Policy
Sample Warranty/Registration Card
Serial No.Model No. Cylinder Code
Series No. Pump Code
Immediately upon receiving your
lift, examine the unit for any
damage. Notify the carrier at
once with any claims.
Two warranty/registration cards
(shown below) are located in
the lift-mounted owner's manual
storage pouch. The sales
representative must process
one of the cards. The consumer
Sample Serial No./Series No. Identification Tag
side tower. This I.D. tag con-
tains the product identification
information provided on the
Warranty/Registration card.
Record the information in the
space provided below (or
document on a copy).
This information must be
provided when filing a war-
ranty claim or ordering parts.
must fill out the other card and
mail it to The Braun Corpora-
tion. The warranty is provided
on the back cover of this
manual. The warranty cards
must be processed to activate
the warranty.
The Braun Serial No./Series No.
identification tag (shown below)
is located on the opposite pump
Model No.
Series No.
Serial No.
Pump Code
Cylinder Code
Date of Manufacture
Note: Retain this information
for future use. You must have
this information when filing a
warranty claim or ordering
Return Authorization Procedure
When processing any warranty claims (parts,
repairs, etc.), all requests must be processed
through The Braun Corporation Product Support
Department. Call 1-800-THE LIFT (extension
3009) during normal working hours. Product
Support will issue a Return Material Authorization
(RMA) number and detail the procedures required
for processing returns and/or authorizing credit.
The lift identification information is provided on the
Braun Serial No./Series No. identification tag and
the two warranty cards (shown above). Record the
identification information in the space provided on
the inside front cover of this manual for future
reference. Document the identification information
in the space provided in the section above also.
This information must be provided when filing a
warranty claim or ordering parts.
Installation Date:
Lift Model:
Lift Serial Number:
Installed By:
Inspected By:
Warranty/Registration card processed by: Date:
Lift Installation Checklist
See reverse side also
Positioning and Clearance Checklist
Is the lift centered in the door opening with the lift base plate parallel (aligned) with the
door opening (at floor level)?
Viewing the lift from outside the vehicle:
Are the vertical arms and platform aligned and parallel with the sides of the door jamb
(page 23 - points 8 and 9)? Note: The lift towers (upright supports) should be per-
pendicular (90°) to the vehicle floor.
Viewing the lift from “pump side” to “opposite pump side” of the vehicle:
Are the vertical arms and parallel arms aligned and parallel with each other (page 23 -
point 10)?
Are the towers (upright supports) perpendicular (90°) to the vehicle floor except when
base plate wedges are used (page 23 - point 11)?
Viewing the lift from outside the vehicle, when unfolding and folding the lift:
Do the vertical arms and parallel arms clear the door opening (vertical sides) as the lift
unfolds and folds (page 23 - points 1 and 2)?
Is there a minimum 1/8" clearance between the deployed bridge plate and any
obstruction on the vehicle floor (page 23 - point 4)?
Is the floor level positioning correct (all lift models), and does the automatic inboard
roll stop (IB lift models) rest fully on the lift base plate when the platform is positioned
at floor level as detailed on pages 38 and 39?
Is the hydraulic platform sensor (fold) pressure switch properly adjusted (as detailed
on pages 41 and 42)?
Do the handrails operate properly (folding/unfolding) and are the handrails properly
aligned (during all lift functions)?
✓
Feb. 2002
25522-06/Tabloid 2/15/02, 12:21 PM38
To Next Page
Loading...
Need help?
General
