10
Filter Replacement Schedule
Filter Type Replacement Schedule Function
Sediment 6 months or 950 gallons
Performs a coarse filtration of original water. Removes mud,
sand, iron, rust, suspensions, and impurities.
Carbon 6 months or 950 gallons Reduces chlorine, taste and odor, lead, and cysts.
Replace the Filters
IMPORTANT: Only replace the filters with new filters designed for this dispenser. Any other type of filter will
damage the machine and void any warranty.
When a filter is approaching the end of its life (around 5 1/2 months), the red bottle-indicator light starts to blink
quickly. When the filter has reached the end of its life (around 6 months), the red bottle-indicator light remains
steadily illuminated.
To change the filters:
1� Remove the old filters by twisting counterclockwise. Attach new
filters by twisting clockwise. Ensure the sediment filter is on the
left and the carbon block filter is on the right.
2� To flush your new filters, follow the instructions in Step 5 - Flush
the Filters, page 7.
3� Press the filter reset switch (12) 3 times until the red indicator
light turns o.
Filter Specifications
Sediment Filter Carbon Filter
(Sediment, Dirt, and Rust Removal) (Taste and Odor Removal)
Filter Capacity
950 Gallons
Filter Capacity
950 Gallons
Flow Rate
0.8 GPM
Flow Rate
0.8 GPM
Suggested PSI
14.5—58 psi
Suggested PSI
14.5—58 psi
Temperature
33—100 °F
Temperature
33—100 °F
Care and Maintenance
• Keep this dispenser in a dry and cool place. Avoid placing in direct sunlight.
• Never set the dispenser on paper or foam, which may store water and cause creepage. Never put anything
flammable beside a foam or paper surface.
• Do not use the dispenser outdoors or in a place that can be splashed by water.
• If the dispenser is not in use for longer than a 24-hour period, turn o the red hot-water and green cold-
12
To Next Page
Loading...
Need help?
General
