To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why is my Brother BB370 fabric not feeding properly?
If the fabric does not feed through your Brother Sewing Machine, try lengthening the stitch length. Remove the darning plate if it is fitted on the needle plate. Ensure you are using the right combination of fabric, thread, and needle. Remove any tangled thread, cleaning the race if necessary. Attach the correct presser foot for the type of stitch you want to sew.
Why are stitches skipped on my Brother BB370 Sewing Machine?
If stitches are skipped on your Brother Sewing Machine, correct the upper threading and use the right combination of fabric, thread, and needle. Replace the needle if it is bent or blunt, and ensure the needle is correctly installed. Remove the needle plate and clean both the plate and the bobbin case to eliminate any accumulated dust.
Why does the needle keep breaking on my Brother Sewing Machine?
If the needle of your Brother Sewing Machine breaks, make sure it is correctly installed and that the needle clamp screw is firmly tightened with the oval screwdriver. Replace the needle if it is bent or blunt, and ensure the upper thread is correctly threaded. Also, use the right combination of fabric, thread, and needle, and attach the correct presser foot for your stitch. Loosen the upper thread tension, lightly guide the fabric and fit the spool properly. If the area around the needle plate or the bobbin case is scratched, contact your retailer or the nearest authorized service center to replace it. Make sure that you are using a bobbin that has been designed for this machine.
General| Brand | Brother |
|---|---|
| Model | BB370 |
| Category | Sewing Machine |
| Language | English |
Instructions to reduce the risk of electric shock from the sewing machine.
Instructions to reduce risks of burns, fire, electric shock, and injury.
Guidelines for maintaining a clear and safe sewing work area.
Specific safety measures to take during sewing operations.
Precautions when children are present or using the machine.
Procedures for troubleshooting and seeking machine repairs.
Checking needle condition and step-by-step guide for replacing it.
Step-by-step instructions for changing the presser foot.
Step-by-step guide for winding thread onto the bobbin.
Instructions for installing the wound bobbin and threading the lower thread.
Specific steps for threading the lower thread with a quick-set bobbin.
Step-by-step guide for threading the upper thread through the machine.
How to use the automatic needle threader.
Table and notes on choosing appropriate fabric, thread, and needle.
How to achieve correct tension for quality stitches and troubleshoot issues.
Step-by-step guide for making automatic buttonholes.
Adjusting buttonholes for symmetry and handling thick seams.
How to attach buttons using the button sewing foot.
Table of common issues, their causes, and how to fix them.
