EasyManuals Logo
Home>Brother>All in One Printer>DCP 8085DN

Brother DCP 8085DN User Manual

Brother DCP 8085DN
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
76
Fuser Error The temperature of fuser unit
does not rise at a specified
temperature within specified time.
Turn the power switch off, wait a few
seconds, and then turn it on again. Leave the
machine for 15 minutes with the power on.
The fuser unit is too hot.
Jam Duplex The paper is jammed in the
duplex tray.
(See Paper jams on page 80.)
Jam Rear The paper is jammed in the back
of the machine.
(See Paper jams on page 80.)
Jam Inside The paper is jammed inside the
machine.
(See Paper jams on page 80.)
Jam MP Tray The paper is jammed in the MP
tray of the machine.
(See Paper jams on page 80.)
Jam Tray 1
Jam Tray 2
The paper is jammed in the paper
tray of the machine.
(See Paper jams on page 80.)
No Paper The machine is out of paper or
paper is not correctly loaded in
the paper tray.
Do one of the following:
Refill the paper in the paper tray or MP
tray.
Remove the paper and load it again.
No Toner The toner cartridge or the drum
unit and toner cartridge assembly
is not installed correctly.
Re-install the toner cartridge or the drum unit
and toner cartridge assembly.
No Tray The paper tray is not completely
closed.
Close the paper tray properly.
Out of Memory The machine’s memory is full. Copy operation in progress
Do one of the following:
Press Start to copy the scanned pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See
Out of memory message on page 39.)
Print operation in process
Reduce print resolution. (See Advanced tab
in the Software User’s Guide on the CD-
ROM.)
Print Unable XX The machine has a mechanical
problem.
Disconnect the machine from the power for
several minutes, then reconnect it.
Protected Device The protect switch of the USB
Flash memory drive is on.
Turn off the protect switch of the USB Flash
memory drive.
Error Message Cause Action

Table of Contents

Other manuals for Brother DCP 8085DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP 8085DN and is the answer not in the manual?

Brother DCP 8085DN Specifications

General IconGeneral
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)30 ppm
Scan toCIFS, E-mail, FTP, Image, OCR, USB
Scanner typeFlatbed scanner
Grayscale levels256
Input color depth48 bit
Output color depth24 bit
Image formats supportedBMP, JPG
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Copier resize25 - 400 %
Maximum copy resolution1200 x 600 DPI
N-in-1 copy function (N=)2
Copy speed (black, normal quality, A4)30 cpm
Total input capacity250 sheets
Total output capacity150 sheets
Auto document feeder (ADF) input capacity50 sheets
Internal memory64 MB
Maximum internal memory576 MB
Sound power level (standby)30 dB
Sound pressure level (printing)56 dB
DisplayTFT
Market positioningBusiness
Maximum print size216 x 356 mm
Media weight (tray 1)60 - 105 g/m²
Paper tray media typesBond paper, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Dimensions (WxDxH)531 x 451 x 475 mm
All-in-one functionsCopy, Scan
Compatible operating systemsWindows 2000 Professional, XP Home Edition, XP Professional Edition, XP professional x64 Edition, Vista Mac OS X 10.3.9 + Linux
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD responder, Web Services (Print), CIFS Client, SNTP
Supported network protocols (IPv6)NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, TELNET Server, HTTP/HTTPS server, SSL/TLS, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMPv6, LLTD responder, Web Services (Print), CIFS Client, SNTP
Standard interfacesEthernet, Parallel, USB 2.0
USB 2.0 ports quantity1
Bundled softwareBrother MFL-pro suite in Windows: BrotherControlCentre 3 Scansoft Paperport 11SE + OCR, Macintosh:BrotherControlCentre 2 Newsoft Presto! Page manager 7
Power consumption (standby)85 W
Power consumption (PowerSave)16 W
Power consumption (average operating)680 W
Package weight21800 g
Maximum duty cycle30000 pages per month
Page description languagesBR-Script 3, Epson FX, IBM ProPrinter, PCL 6

Related product manuals