5-19
Confidential
1.3.12 Set PC print functions (function code: 43)
<Function>
This function is used to change the settings of the various print functions summarized in the
table below.
<Operation Procedure>
(1) Press the [4] and [3] buttons in this order in the initial state of maintenance mode. "Manual
Feed" is displayed on the LCD.
(2) Press the [ ] or [ ] button to display the function you want to change the setting of,
and press the [OK] button.
(3) For fixed parameters (On/Off, etc.), press the [ ] or [ ] button to display the setting
you want to apply, and press the [OK] button. The setting is saved.
For parameters requiring numerical value entry, use the keypad to enter a numerical
value, and press the [OK] button. The setting is saved.
(4) Press the [Stop/Exit] button to return the machine to the initial state of maintenance
mode.
Setting functions
LCD Description Set value Default
Manual Feed Manual feed setting On/Off Off
Resolution Print resolution 300/600/1,200 dpi 600 dpi
Toner Save Toner save mode setting On/Off Off
Density Print density level -6 to 6 0
JB-Can Time Time until host timeout is
triggered when job is cancelled
0 to 225 (s) 4 (s)
Sleep Time Time until sleep mode is entered 0 to 99 (min) 5 (min)
Page Protection Page memory setting Off/Letter/A4/Legal/Auto Off
Emulation Emulation (print language)
setting
Auto/HP/PS Auto
Auto I/F Time Interface open time 1 to 99 (s) 5 (s)
Media Type Paper type setting Thin/Plain/Thick/
Thicker/Trancparency/
Recycled/Bond/
Envlopes/EnvThin/
EnvThick
Plain or Thin
Paper Size Image development area setting Letter/Legal/A4/
Executive/B5/JISB5/A5/
B6/A6/Monarch/C5/
COM10/DL/DLL/
A4Long/PostCard/Folio
Letter or A4
Copies Number of copies 1 to 99 (copies) 1 (copies)
Orientation Print direction setting Portrait/Landscape Portrait
P-Pos X-Offset Print position offset in X
(landscape) direction
-500 to 500 (1/300 dpi) 0 (1/300 dpi)
P-Pos Y-Offset Print position offset in Y (portrait)
direction
-500 to 500 (1/300 dpi) 0 (1/300 dpi)
AutoFF Auto form feed setting On/Off Off
AutoFF Time Timeout period of auto form feed 1 to 99 (s) 5 (s)
FF Surpress Blank page skip setting On/Off Off
Auto LF Auto linefeed (LF) setting On/Off Off
Auto CR Auto carriage return (CR) setting On/Off Off
Auto WRAP Setting for Auto CRLF at print
width
On/Off Off
To Next Page
Loading...
Need help?
General
Weight and Dimensions
