Brother MFC-8510DN Service Manual

2-26
Confidential
Replace Parts PF Kit 1
Printable pages set for paper feeding kit 1 have
reached the limit. (Printing does not stop.)
5200 2-36
Replace Parts PF Kit 2
Printable pages set for paper feeding kit 2 have
reached the limit. (Printing does not stop.)
5300 2-36
Replace Parts PF Kit
MP
Printable pages set for the MP paper feeding kit
have reached the limit. (Printing does not stop.)
5100 2-36
Replace Toner
The toner sensor detected no toner remaining
or the number of rotations of the developer
roller has reached the upper limit.
6300 2-39
Scanner Error
The voltage value was above the upper limit
during scanning.
B700 2-58
The voltage value was below the lower limit
during scanning.
B800 2-58
The white level does not increase during
scanning although the light intensity was
increased.
B900 2-58
A white level not within the standard was
scanned when function code 55 was executed.
BB00 2-59
A black level not within the standard was
scanned when function code 55 was executed.
BD00 2-59
Self-Diagnostic
Rechecking the error after the power switch
was turned OFF and then ON again because
an error was detected by the center thermistor
of the fuser unit.
(This message is displayed for approximately
15 minutes when the machine is restarted after
error code 5800 has occurred.)
5900 2-38
Size Error
When printing from paper tray 1, a paper size
not supported for paper tray 1 was specified
from the driver.
9700 2-51
When printing from paper tray 2, a paper size
not supported for paper tray 2 was specified
from the driver.
9800 2-51
Size Error DX
The registration front sensor detected that the
paper fed was smaller than or larger than the
specified size in duplex printing mode.
8900 2-46
Printed on a paper size not supported for
duplex printing was specified from the driver.
9900 2-51
Size Mismatch
The registration front sensor detected that the
paper length was too short when faxing or
printing a list or report.
8000 2-43
When printing from the MP tray, the size of
paper set in the MP tray does not match the
size specified by the driver.
9000 2-48
When printing from paper tray 1, the size of
paper set in paper tray 1 does not match the
size specified by the driver.
9100 2-48
When printing from paper tray 2, the size of
paper set in paper tray 2 does not match the
size specified by the driver.
9200 2-48
Toner Low
The toner sensor detected that the toner
remaining has fallen below the specified level
or the developer roller counter has exceeded
the specified value.
6700 2-39
Error Message Description
Error
codes
Refer
to:

Brother MFC-8510DN Specifications

General

Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Duplex printing mode	Auto
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Duplex print speed (black, normal quality, A4/US Letter)	9 ppm
PictBridge	No
Scan speed	2.68 sec/page
Dimensions (WxDxH)	405 x 415 x 423 mm
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	Scan
Printing colors	Black
Maximum duty cycle	- pages per month
Recommended duty cycle	500 - 3500 pages per month
Page description languages	BR-Script 3, Epson FX, IBM ProPrinter, PCL 6
Copier resize	25 - 400 %
Maximum copy resolution	1200 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4, 9, 16, 25
Time to first copy (black, normal)	10.5 s
Copy speed (black, normal quality, A4)	36 cpm
Scan to	E-mail, E-mail Server, File, FTP, Image, OCR, USB
Scan drivers	ICA, ISIS, TWAIN
Scanner type	Flatbed & ADF scanner
Grayscale levels	256
Input color depth	48 bit
Maximum scan area	Legal (216 x 356) mm
Output color depth	24 bit
Image formats supported	BMP, JPG
Maximum scan resolution	19200 x 19200 DPI
Document formats supported	PDF
Faxing	Mono faxing
Fax memory	500 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, JPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)	300
Paper input type	Paper tray
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	850 sheets
Total number of input trays	1
Maximum number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Auto document feeder (ADF) input capacity	35 sheets
Custom media width	76.2 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 355.6 mm
Paper tray media types	Bond paper, Plain paper, Pre-Printed, Recycled paper, Thin paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Preprinted forms, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Auto Document Feeder (ADF) media weight	64 - 90 g/m²
Display	LCD
Market positioning	Home & office
Display number of lines	5 lines
Display number of characters	22
Standard interfaces	Ethernet, USB 2.0
Security algorithms	802.1x RADIUS, EAP, EAP-TLS, EAP-TTLS, MD5, PEAP
Internal memory	64 MB
Processor family	Star Sapphire
Maximum internal memory	320 MB
Sound power level (standby)	37 dB
Sound pressure level (printing)	59 dB
Sound pressure level (quiet mode)	54 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	1.2 W
Power consumption (standby)	8.1 W
Power consumption (PowerSave)	336 W
Power consumption (average operating)	651 W
Package weight	20.100 g
Sustainability certificates	ENERGY STAR