2. assembling the carrycot
The carrycot consists of the frame, the carrycot fabric, with base plate, mattress
and the apron. Touch fasteners ensure that the carrycot hangs stably in the frame.
step 1 attaching the carrycot fabric to the frame
The round side of the carrycot fabric fits in the round side of the frame.
a. Fit the frame (horizontally) onto the chassis.
b. Unfasten the touch fasteners.
c Fasten the 12 touch fasteners to the frame, in the
order 1 to 6.
d Place the 2 waist belts in the pockets near the frame
supports on the sides of the carrycot.
Note Make sure the plastic wires at the top and bottom
stay in their bags.
step 2 fitting the mattress
a Place the round side of the mattress against the round
side of the carrycot, with the cover opening pointing
downwards.
To Next Page
Loading...
Need help?
General
