Name: Canon PIXMA PRO-100 Series
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Wired Connection

Preparation for Connection

Before Starting Wired Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the POWER lamp (A) will be lit.

Notes on Wired Connection

Make sure that the computer and router (A) (or access point) are connected.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

For ofﬁ ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

This printer cannot be used over wireless and wired connections at the same time.

When using a router, connect the printer and computer to the LAN side (same network segment).

Cable Connection

You will need an Ethernet cable (sold separately).

1. Remove the Cap (A) from the upper port located on the right side at the back of the printer.

•

Other manuals for Canon PIXMA PRO-100 Series

Questions and Answers:

Need help?

Do you have a question about the Canon PIXMA PRO-100 Series and is the answer not in the manual?

General