Canon PIXMA TS8300 Series User Manual

2
Setting Up the Printer
2
Remove the tape and film on the ink tank.
b
a
•
Check that no tape is left over.
3
Slowly remove the orange cap.
Important
•
Do not squeeze the ink tank with the
Y-shaped air hole blocked.
•
Do not touch the areas shown in red.
4
Install the ink tank.
•
Insert the ink tank into the print head and press down
until it clicks.
5
Check that the color of the ink tank you installed
appears on the screen.
Important
If the color is not displayed on the screen even though you
have installed the ink tank, the color of the ink tank may be
wrong or you may have installed an ink tank, such as one
with a different model number, that is not supported by this
printer. Either install an ink tank for the correct color or use the
provided ink tank for setup.
6
Repeat steps 2 through 5 to install all the ink
tanks.
•
Check that all the colors appear.
7
Close the scanning unit / cover.
•
The printer will start initializing.
Caution
Watch your fingers.
a
b
5. Loading Paper
Check!
Remove any orange tape.
1
Tap OK.
2
Remove the cassette from the printer and
remove the cassette cover.
a
b
Cassette cover

Canon PIXMA TS8300 Series Specifications

General

Print Technology	Inkjet
Number of Ink Tanks	6
Scanner Type	Flatbed
Scanner Resolution (Optical)	1200 x 2400 dpi
Print Speed (Color)	10 ppm
Connectivity	Wi-Fi
Display	4.3-inch Touchscreen
Duplex Printing	Yes
Functions	Print, Copy, Scan
Ink Type	Individual Ink Tanks
Borderless Printing	Yes
Paper Sizes	A4, A5, B5, Letter, Legal, Envelopes
Mobile Printing	AirPrint
Input Paper Capacity	100 sheets (plain paper)