Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Connection Guide

5
Camera/Printer Connection
Connect the camera to the printer using the following procedures. (Please refer to your
printer user guide for details about the printer connection.)
z Once the camera and printer are ready for printing, the , or icon appears
on the camera’s LCD monitor.
z Printing procedures differ according to the icon that appears on the LCD monitor
(p. 2).
 Before You Connect the Camera
z Prepare the printer. (Refer to the printer’s user guide.)
z Confirm which connection cable should be used (see page 2).
1
Connect the camera to the printer.
2
Turn the printer’s power on.
3
Set the camera to Playback mode and turn the power on.
Some camera models power up when the printer’s power is turned on.
4
, or appears on the upper left corner of the LCD
monitor. You can now print.
z The following operations are not available during a camera/printer connection.
• Movie playback.
• Language settings that use the SET button and the MENU button.
Disconnecting the Camera and the Printer
1. Detach the cable from the printer.
2. Turn the camera’s power off.
3. Detach the cable from the camera.
• When you detach the cable, hold the plug and do not pull by the cable.
Camera: Connect the cable to the DIGITAL terminal.
Printer: Refer to the printer's user guide.
To Printer
This illustration shows the PowerShot S400DIGITAL ELPH/
DIGITAL IXUS 400 as an example.
DIGITAL terminal

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English