Carrier 40MBFAQ User Manual

40MBFAQ: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
4
WIRELESS REMOTE CONTROL
Before you begin using your new air conditioner, familiarize yourself with the remote control.
Fig. 2 — Remote Controller Function Buttons
NOTE: New remote controller starting on production of week 10 year 2021 (serial number 1021V17181). For advanced functions, refer to the
RG10B(B1)/BGEFU1 Wireless Remote Controller’s Service Manual.
ON/OFF
Turns the unit on or off.
MODE
OK
TIMER
HUMIDITY
LED
BOOST
ECO/GEAR
Scrolls through operation modes
as follows:
AUTO J COOL J
DRY J
HEAT J FAN
FAN SPEED
SWING
Increases temperature in
1°F (0.5°C) increments.
Max. temperature is
86°F (30°C).
NOTE: Press together &
buttons at the same time
for 3 seconds alternates
the temperature display
between the °F and °C.
TEMP
TEMP
Use to confirm the selected functions.
Decreases temperature
in 1 F°(0.5°
C) increments.
Min. temperature is
OO
60 F(16 C).
Turns indoor unit’s LED display
and air conditioner buzzer on
and off, which creates a comfortable
and quiet environment.
Adjust the room humidity during the
Dry mode in a range of 35%~85%.
Press to increase the humidity in
5% increments.
NOTE: After setting, the humidity
settings appear on the screen.
NOTE: If the floor console is
matched with a multi zone outdoor
unit or if a wired controller is used,
the humidity sensor is not active.
Set timer to turn unit on or off
Humidity
Press to enter the energy efficient
mode in the following sequence:
ECO GEAR(75%)
GEAR(50%)
mode ECO

Selects fan speeds in the
following order:
AU
J
J
20%
60% 40% 80% 100%.
J
J
J
Press the TEMP or button
to increase/decrease the fan
speed in 1% increments.
Enables unit to reach preset
temperature in shortest possible time.
Boost
Previous setting
SET
Scrolls through operation
functions as follows:
The selected symbol flashes
on the display area, press
OK to confirm.
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
BREEZE AWAY
This feature avoids direct air flow
blowing on the skin
Sleep( )
Follow Me( )
AP mode
J
J
J
J
.......
Fresh( )
( )
clean( )
Active
Active
J
clean( )

Carrier 40MBFAQ Specifications

General

Brand	Carrier
Model	40MBFAQ
Category	Heater
Language	English