scale continues to beep slowly.
If the weight loaded is above 2.990kg, HIGH
limit, the scale continues to beep rapidly.
6. Counting Function
● Counting without Tare
① Initial display as above.
② Press
key twice to go to sample unit
selection mode
③ Press
key to select the number of
sample unit. You can select 10, 20, 50, 100,
200, or 500 as a sample unit.
④ If you select "P = 10" as a sample unit, then
please put 10 sample units on the scale.
Then press
key to set sample units.
⑤ Put all of commodities you wish to count,
and then check the number of pieces on
display.
⑥ Remove all of commodities from the scale.
11
To Next Page
Loading...
Need help?
General
