Cascade C Series Installation Instructions

2
NSTALLATION
I
Attach overhead hoist
A
Remove banding.
BAttach hoist to top of backrest as shown
and lift Attachment into vertical position
on pallet. Use wood blocking as required
to stabilize Attachment.
CRemove bolt-on lower mounting hooks
(if equipped).
1
2
Unlock quick-change lower
mounting hooks (if equipped)
ARemove pin and drop hooks into
unlocked position.
BReinstall pin in lower hole.
WARNING: Make sure overhead hoist
has a rated capacity of at least
2000 lbs. (910 kg.)
cascade
®
C-675514-1
CL0097.ill
Tighten Capscrews:
Class II, III Mounting – 165 ft.-lbs. (225 Nm)
Class IV Mounting – 190 ft.-lbs. (255 Nm)
A
Pin
LH lower
Hook
NOTE: Guides can be reversed to
reduce hook-to-carriage clearance
(See lower hook installation, Step 4).
Guide
5/8-in. (16 mm)
offset on top
provides max.
clearance.
B
FP0202.ill
B
C
Bolt-on
Lower Hooks
Wood Blocking

Cascade C Series Specifications

General

Brand	Cascade
Model	C Series
Category	Forklifts
Language	English