Cascade TF40-18 User Manual

5
4
Step 2
Pass the Power Cord through the center hole of the base.
Align the Base Front (B) and insert the four posts on the Fan
Body (A) into the four holes on the top of the base. It will only fit
one way. Place the four Body Screws (D) into the holes through
the bottom of the base and securely tighten.
Run the power cord through
the guide on the bottom of the
Base Back (C) by tucking the
cord under the tabs. Set fan
upright on the base and it is
ready for use.
Step 1
B) Base Front
C) Base Back
D)
4
X Screws
PARTS LIST
A) Fan Body
E) Remote Control
ASSEMBLY ASSEMBLY

Cascade TF40-18 Specifications

General

Brand	Cascade
Model	TF40-18
Category	Fan
Language	English