Case IH FARMALL 110U - User Manual

Printedin U.S.A.
© 2017 CNH Industrial Italia S.p.A. All Rights Reserved.
Case IH is a trademark registered in the United States and many
other countries, owned by or licensed to CNH Industrial N.V.,
its subsidiaries or affiliates.
FARMALL
®
110U
FARMALL
®
120U
Tractor
Part number 48038069
2
nd
edition English
October 2017
Replaces part number 47985320
SERVICE MANUAL

Summary

INTRODUCTION

Foreword: Equipment Servicing Notices

Important notices and responsibilities for equipment servicing and repairs.

AC System Repair Warnings

Critical safety warnings and precautions for servicing the AC system.

Personal Safety Rules

Safety guidelines for personal protection during operation and maintenance.

Accident Prevention and Generalities

General safety rules and accident prevention measures for workshop operations.

Welding, Startup, and Motor Safety

Safety precautions for welding, engine startup, and motor operations.

Electrical, Hydraulic, Wheels, and Removal Safety

Safety rules for electrical, hydraulic systems, wheels, tires, and removal procedures.

Ecology and Environment Safety

Safety rules related to ecology, environment, and proper disposal of materials.

AC System Personal Safety

Personal safety regulations specific to handling air conditioning systems.

Basic Shop and Assembly Instructions

Guidelines for shop procedures, assembly, sealing, and spare parts.

Protecting Electronics During Charging and Welding

Procedures to protect electronic systems from damage during charging and welding.

Special Tools for Repair

Importance and benefits of using specialized tools for reliable repair operations.

Hydraulic System Contamination

Causes, types, and problems associated with hydraulic fluid contamination.

Consumables and Specifications

Recommended CASE IH products and specifications for various systems.

Fluid Capacities and Quantities

Table detailing fluid capacities for different tractor systems.

Engine - 10

Engine and Crankcase: Torque Specifications

Specific torque values for engine and related component fasteners.

Engine and Crankcase: Removal Procedures

Step-by-step guide for safely removing the engine from the tractor.

Engine and Crankcase: Installation Procedures

Step-by-step guide for correctly installing the engine onto the tractor.

Engine and Crankcase: Oil Level Check

Method for checking and topping up the engine oil level.

Engine and Crankcase: Oil and Filter Replacement

Procedures for draining oil and replacing the engine oil filter.

Engine and Crankcase: Troubleshooting

Common engine problems, their possible causes, and recommended corrections.

Fuel Tank: Torque Specifications

Specific torque values for fuel tank mounting hardware.

Fuel Tank: Removal Procedures

Step-by-step guide for safely removing the fuel tank.

Fuel Tank: Installation Procedures

Step-by-step guide for correctly installing the fuel tank.

Fuel Tank: Lower Guard Removal

Procedure for removing the lower guard of the fuel tank.

Fuel Tank: Lower Guard Installation

Procedure for installing the lower guard of the fuel tank.

Fuel Tank: Support Removal

Steps to remove the fuel tank support assembly.

Fuel Tank: Support Installation

Steps to install the fuel tank support assembly.

Fuel Tank: Filler Neck Filter Cleaning

How to clean the filter in the fuel tank filler neck.

Fuel Tank: Fluid Draining

Procedure for draining the fuel from the fuel tank.

Fuel Tank Lines: Replacement

Steps for replacing the fuel tank lines and couplings.

Auxiliary Fuel Tank Lines: Replacement

Procedure for replacing auxiliary fuel tank vent lines.

Fuel Filters: Removal (Support)

Steps to remove fuel filters and their support bracket.

Fuel Filters: Installation (Support)

Steps to install fuel filters and their support bracket.

Case IH FARMALL 110U Specifications

General

Brand	Case IH
Model	FARMALL 110U
Category	Tractor
Language	English